Moto Guzzi V85 TT - Service manual > Installing the fork legs

The following procedure is described for a single fork stanchion, but is valid for both stanchions

• Insert the fork stanchion (1) into the upper and lower steering yoke holes

• Insert and tighten the screw (2)

• Insert and tighten the screws (3)

Removal

• Loosen the screws (1) from both sides of the steering yoke

• Unscrew and remove the screws (2)
• Remove the U-bolt (3)

• Unscrew and remove the fastening bushing (4)

• Undo and remove the screw (5)
• Remove all the wiring from the cable grommet
• Momentarily remove the handlebar, complete with controls, from the yoke

• Remove the steering yoke (6)

Removing

• Remove the upper steering yoke
• Remove the front mudguard
• Remove the front wheel
• Undo and remove the screw (1)

• Unscrew and remove the lower ring nut (2), using the special tool

• Remove the dust cover (3)

• Remove the dust seal ring (4)

• Remove the lower steering yoke (5) along with the fork stanchions
• Undo and remove the screws (6) and remove the fork stanchions (7)

See also: