Moto Guzzi V85 TT - Service manual > Removal

Removal

• Place a support under the vehicle and secure it using belts so that the wheel can move freely and the vehicle does not fall.
• Remove the ABS sensor cable from the cable glands (1)

• Unscrew and remove the screws (2)

• Remove the ABS sensor (3) from the front right fork

• Unscrew and remove the screws (4)
• Remove the front left brake calliper (5) from the brake disc

• Unscrew and remove the screws (6)
• Remove the front right brake calliper (7) from the brake disc

• Loosen the screws (8)

• Loosen the screws (9)

• Unscrew the nut (10) and remove it.

• Retrieve the washer (11)

• Remove the wheel axle (12)

• Remove the front wheel (13)

• Retrieve the washer (14)

REMOVING THE FRONT BRAKE DISCS

The following procedure is described for a single brake disc, but is valid for both front brake discs.

• Remove the front wheel
• Unscrew and remove the screws (1)

• Remove the phonic wheel (2)

• Remove the front brake disc (3)

FRONT WHEEL BEARING REMOVAL

• Remove the front wheel
• Remove the dust cover (1)

• Using a generic bearing puller, remove the bearing as illustrated in the figure
• Repeat the entire operation from the opposite side of the wheel to remove the second bearing

See also: