Ducati Scrambler 800 - Service manual > Crankcase: connecting rod assembly
Engine / Crankcase: connecting rod assembly
See also:
Ducati Scrambler 800 - Service manual > Main bearings
To replace the bearings proceed as follows: heat the crankcase half in an oven to 100 ВєC; remove the bearing using a drift and hammer; install the new bearing (while the crankcase is still hot) keeping it perfectly square in its seat using a tubular drift that only bears on the outer ring of the bearing; allow the parts to cool and check that the bearing is securely fastened to the crankcase half.
Ducati Scrambler 800 - Service manual > Reassembling the connecting rod assembly
Before starting, check that the crankshaft main bearing and big-end journals are free of burrs or evident signs of machining: if necessary, clean the surfaces with very fine emery cloth and oil.
Ducati Scrambler
Fantic Caballero 500
Indian FTR 1200
Moto Guzzi V85 TT
Royal Enfield Bullet Trials Works Replica
Triumph Scrambler 1200 XE
Triumph Street Scrambler
Yamaha XSR700
Ducati Scrambler 800
Moto Guzzi V85 TT
Triumph Scrambler 1200 XC