Ducati Scrambler 800 - Service manual > Cylinder head assembly: valves - rocker arms
Engine / Cylinder head assembly: valves - rocker arms
- Refitting the cylinder heads
- Overhauling the cylinder head components
- Removing the valves and rocker arms
See also:
Ducati Scrambler 800 - Service manual > Cylinder head assembly: camshafts
Refitting the intake manifold Position intake manifolds (3) and fix them using nuts (2). Tighten nuts (2) to a torque of 15Nm (Min. 13Nm - Max. 17Nm).
Ducati Scrambler 800 - Service manual > Refitting the cylinder heads
Warning To prevent oil leaks in the contact area between cylinders and crankcase, each time the head is removed, cylinder and piston must be removed as well to clean the mating surfaces of crankcase and cylinder and restore the worn gaskets and O-rings and apply again sealing compound.
Ducati Scrambler
Fantic Caballero 500
Indian FTR 1200
Moto Guzzi V85 TT
Royal Enfield Bullet Trials Works Replica
Triumph Scrambler 1200 XE
Triumph Street Scrambler
Yamaha XSR700
Ducati Scrambler 800
Moto Guzzi V85 TT
Triumph Scrambler 1200 XC